Showing posts with label articles. Show all posts
Showing posts with label articles. Show all posts

1/10/2012

Tiger I 1/48 Winter camo "Part 5" THE END

...
Finally the model is finished. After add the mud and other small effects, it is ready in case we want to make a small diorama.Is very important to see the nice effect made by the acumulated earth in the horizontal surface in the upper hull. It help to create contrast and bring down the excesive white brightness.

Ok, let's go to finish the model. Some steps before. use a graphite pencil to make the metal effect in the MG ring. This useful tool can help us to give a metal look to many details. Keep it sharp.






The different tools was painted using Vallejo colors. Paint some shadows and some highlights to create a volume in the tools and accesories. You can add some dust effects with pigments or washes to adapt the tools to the rest of the weathered vehicle.


The fire extinguiser is really small. But I was able to paint a mini label with a fine brush and vallejo colors. Also I painted it with Dark Yellow, like the old one was remplaced by a new one.


The general look of the tools is good enought for this scale.

now is time to make the dust, earth and mud. This time, I have return to my old technque of pigments, but this time with the new AK pigments, which is a bit different than my old ones. The colors is also differnet. I was tired of the same shades so, the new ones are more ...neutral, less bright. Here you can find the whole range, limited, which means that it is the whole collection, just the basic stuff to avoid get crazy looking among 1 million colors. Now than the actual techniques is not only based in pigments, could be a good alternative these colors if we want to something ocasional, like in my case right now.


You can use the Pigment fixer or just White Spirit to fix the pigments. if you are not sure how will be the look, try frist the White Spirit and later the Fixer Glue. Pigments fixed with White Spirit can be removed more or less easily. Apply the different shades of pigments and then, use a brush with Fixer to humidify the surface.



Try to concentrate the dust around the details and use dar colors for the most hiden areas, around the details or turret, etc...
When it is dry, the look will be like this one. You can repeat the process as much as you want to increase the effect of acumulated earth or dust.



And now we will amke the mud with the actual method, using the enamel products from AK and plaster. Even if the Fresh Mud color is a bit satin, we can add Wet Effect Fluid to the mix to get a more shiny effect in the mud. Use an old brush to make the mix.



Low density mix of mud, this means, with more Enamel color and less plaster, will provide us smaller dots of mud when we make of splashed mud. Use an airbrush to project air over the brush loaded of mud mix. It will generate a nice splash over the front hull.





Use the same mix to apply mud in the tracks.


And after it is dry, apply the Dark Steel pigment to create the metal effect in the external parts fo the links. If it is not enought shiny, you always can mix this powder with Humbrol 11 (silver) and apply the mix with dry brush over the surface.





Well, the model is finished. We can add stowage or more details if we want , but I prefer to leave it clean of stuff to allow see the effects over the model.






























I hope you have enjoy this big step by step. remeber that you have another 4 chapters explaining the whole process since the begining. if you have any doubt or comment, please, feel free to post here. Thank you very much for watching!








Mig Jimenez








.....





1/01/2012

Tiger I 1/48 Winter camo "Part 3"

...

HAPPY NEW YEAR 2012 to all of you!!

The best way to start a new year is making models, so, here my contribution to this new year. This is the 3th chapter of the whole painting process of a winter Tiger I in 1/48th scale. If you haven't see the other two, please, read first the chapter I and the chapter II.
Now is time for chipping and oil paint effects.


We start using the dark bromw 70922 from vallejo. It's a good color for paint dark metal chips. Use a very fine brush, new one and sharp.



Start doing small dots, and lines...very small, and keep gorwing it as much as you want.









Treat each detail in a different way. Example, more intense chipping in some parts, while others remain more new. That contrast will help to the model to give bigger realism.

The oil paints is always a important step in each weathering. This paint is very flexible, easy to blend and colorfull. The oils can help us to give contrast, deep, shadows, and much more effects to our models. In this case, we will use few basic colors to create a contrast effect in some mudguards and some horizontal areas. Maybe, in anotehr kind of subject we can use more oils, or less. We must adapt this technique to each model and evoirement.





Use the white color to reiforce the white camo. Use a medium round brush for this task.





Apply the color only in one side of the mudguard section.





Just in the next section, apply a grey-brown color.





Clean the brush or take a new one and with a litle White Spirit stump the color.





See the result. The transition is soft, but each color, both , the white and brown, are gradually more intense to the union of both mudguards sections. It create contrast, a subtile and nice visual effect to give volume to our model. You can use this technique not only in the mudguards, but in any other part of your model, like panels, hatches, engine compartiments and much more. Just selct the apropiated color for each subject. In this case I used white because the base color is winter camo.







Another example. This time we use a dirty grey to represent the acumulated dirt over the horizontal surfaces, like around the turret ring.







One more time, paint and stump with a clean brush and a little White Spirit.





Use the white Oil color to make the highlights in the winter camo. After the washes adn streaking effects, the look of our model will be a little dark, not as white as we can expect of a winter tank. Now is time to bring to the life the white camo adding small dots of white color in some areas. Don't over do it and be RANDOM with this process. And of course, stump or blend the color to make it softer and natural.









Ok, another step is already done. Very slowly, our model is getting contrast and tonal variation. This is very important in this kind of vehicles, to avoid the monotonie and boring surfaces. Note how you can see the original camo under the winter camo, faded and damage by the envoirements and elements. The chipping is adapted to the scale. These ones must be small and not excesive. And the new shades that we have give to our model will give volume and a rich surface. Now is time to paint all small details before we made the mud and dust and the final effects.
In the next chapter, I will explain how to give the final touches to the model. We will work with the spare links around the turret, painted also in winter camo. We will add the earth, mud, oils and grease and much more. Keep tunned and thank you very much for read this. I hope you like the progress of this small example of a winter tank. It is really easy and simple if you follow these steps.




...



12/13/2011

Tiger I 1/48 Winter camo "Part 2"

...
Welcome again to the second part of this interesting article about how to paint a Tiger I with a winter wash. In the preview chapter I explained how to use the Worn Effect fluid to make a Camo with chipping. Now we will use it again to make the winter wash.

Apply a nice coat of Worn Effects fluid over your vehicle. remeber that it is water based, it is clean, no bad smell and easy to use, just pour it in your airbrush and apply a coat.


After a couple of minutes, apply your white color. tamita will work very well in this case. Note that I applied a soft and random layer of white color. Not too thick.


Now we can start scratching the surface. Apply a little water over it and start moving your brush over the surface until see that the paint come off. It is very easy.






See how random is it. Some areas can be very damaged and others almost new.







Now is time for the washes. The color AK 066 Wash for Africa vehicles will be a good color also for winter vehicles. It is a bit neutral and was designed for light sand colors.


Apply a drop over the lines, joins, details and rivets. Don't worry if you are not accurate. We will clean the excess later. be sure your base is SATIN, and NOT FLAT. this is very important to avoid the expansion by capilarity.





Now using a clean brush and thinner, we will clean the excess of wash. The wash color must be dry. I usually wait for 3 or 5 minutes after apply the wash.







This process is very easy and simple. if we follow the rules (satin surface, controlled application, let it dry and clean the excess) we will obtain always a good result.









Let's go for a funny step: Winter Streaking grime



This technique is very simple. Just draw fine vertical lines in the vertical or inclinated surfaces. Make some of then shorter than others.


After it is dry for a couple of minutes, use a flat clean brush with a little Thinner and stump the lines with vertical motions. Don't try blend the color at once, but in several attemps.




You must get a look like this:


If you reomve to much, just repeat the proces after few minutes.







In the next chapter we will see how to make the metal chips and we will work with oils too.
Thanks for take your time to read this and I hope you like it.

Don't be shy and post your comments or feedback. I am working on this right now, so....your suggestions can help me to be focus in this or that subject or problem.


...